Wego Converter; Reset Settings And Clearing Of Users; Product Approval - Nice WEGO Complete Manual

NOTES 2: The reader understands 0 on the left as a valid digit.
When a user is activated, whether ID + password or card, the unit internally verifies that the user has been properly
enrolled via the "91" command from the menu. If the user has not been enrolled, the reader will generate a visual
warning in red and audible with 2 short (fast) beeps. If the user is properly enrolled, the device will generate a visual
warning in green and an audible warning with 2 short beeps (but longer than the non-enrolled beep). It will also send
an opening command to the WeGo Converter so that the relay remains activated according to what is configured on
the reader. For example:
- Relay time = 0: In this case, the relay will not be activated by the WeGo Converter.
- Relay time between 1 and 254 seconds: The relay will be activated for the configured time.

13.2.1 - WEGO CONVERTER

The WeGo Converter has a push-button input, which has the same effect as a user activation. By pressing the button,
the reader will activate the output of the WeGo Converter (the activation of the relay will be according to the relay
time settings explained above).
The WeGo Converter has a door sensor input, so it is possible to generate an audible and visual warning if the user
has forgotten or left the door open longer than necessary for access. The equipment has two types of signaling, im-
mediate and by access.
Immediate activation occurs when the gate (and therefore the sensor) is opened without proper user activation. In
this case, the reader will trigger the intermittent audible and visual alarm until the sensor returns to the closed state.
Access activation occurs when a user makes valid access and opens the gate. In this case, the equipment will count
the door sensor along with the relay time.
Example 1: Sensor time = 0
- The sensor will not be triggered in either the immediate opening or the access opening.
NOTES: Set the time to 0 if you do not use the door sensor.
Example 2: Sensor time between 1 and 255
- With instant opening, the reader will trigger the open door alarm if the sensor is open for less than 0.6 seconds and
will stop the alarm when the sensor returns to its normal (closed) state.
- When opening by access, the reader waits for the relay time and then waits for the door open time.
If the sensor closes before the end of the relay time + door sensor time, the door open alarm will not occur.
If the user opens and holds the door open after the activation time (relay time) plus the alarm time (door sensor time),
the unit will sound the alarm until the sensor returns to its normal operating state (closed).
If the system is configured with a value that is too large (or not standard for a gate opening and closing), it may cause
sensor openings without valid access to not trigger the intrusion alarm after valid access.

14 - RESET SETTINGS AND CLEARING OF USERS

The WeGo Converter requires the user to press and hold the internal button on the top of the box. At this moment
the reader emits a short sound and a flash of the blue LED intermittently, while pressing the button of the WeGo
Converter.
If the user wants to reset the settings to the factory default, they must keep the button pressed between 10 and
20 seconds, the reader will start flashing alternately the LED in orange color. When releasing the button within this
period, the reader will emit 2 short beeps with the LED in red to confirm the user's action.
If the user wants to delete all enrolled users, they must keep the button pressed for a period between 20 and 30
seconds, the reader will start flashing alternately the LED in red color. When releasing the button within this period,
the reader will emit 3 short beeps with the LED in red to confirm the user's action.
If the button is held down for more than 30 seconds, the reader will restart the process and you will have to wait again
for the times described above.

15 - PRODUCT APPROVAL

Resolution No. 680 - "This equipment is not entitled to protection against harmful interference and may not cause
interference with duly authorized systems".
30 ENGLISH