1. Open loading door
3. Remove foil hose and polystyrene padding from the
machine.
Drying rack unpacking
Caution! Before using the appliance all of the
transportation parts and the drying rack must be
removed from the drum. The inside of the drum must also
be clean.
To unpack the rack:
1. Remove middle polystyrene part by pulling it.
2. Pull off adhesive strips
from inside machine on
top of drum.
1 2
4
3
Loosen polystyrene parts 3 and 4.
2. Lift slightly rack and take it carefully out from the
drum.
3. Remove right polystyrene part by pulling it.
4. Remove left polystyrene part by pulling it.
5