Machine Settings - Zanussi ZDC 77570W User Manual

COTTON CUPBOARD DRY
3)
COTTON IRON DRY
SYNTHETICS CUPBOARD DRY
1) Different loading volume data may be needed in some countries as a result of different measuring methods.
2) in accordance with EN 61121
3) Hints for test institutes: cycle has to be checked in accordance with EN 61121

Machine settings

Setting
Buzzer permanent on/off
1)
Water hardness
Water contains, a variable quantity of limestone and mineral salts of which quantities vary according to geographical locations
1)
thus varying its conductivity values. Relevant variations of the conductivity of the water compared to those prefixed by the factory
could slightly influence the residual humidity of the laundry at the end of the cycle. Your dryer allows you to regulate the sensitivity
of the drying sensor based on conductivity values of the water.
16
Parameter
3)
3)
The alarm is by default always off. To set permanent alarm on (off):
1. Turn the programme selector to any programme.
2. Press simultaneously the Buzzer and Dryness buttons and hold down for approx. 5
seconds.
1. Turn the programme selector to any programme.
2. Press simultaneously the Dryness and Start/Pause buttons and hold down for ap-
prox. 5 seconds.
3. Press the Start/Pause button until you set desired level:
- low conductivity <300 μS/cm
- medium conductivity 300-600 μS/cm
- high conductivity >600 μS/cm
4. To memorize setting press simultaneously the Dryness and Start/Pause buttons or
turn knob to
(7 kg load pre-drained at 1000 rpm)
3.92 / 125
(7 kg load pre-drained at 1200 rpm)
3,75
(7 kg load pre-drained at 1400 rpm)
3,60
(7 kg load pre-drained at 1800 rpm)
3,20
(7 kg load pre-drained at 1000 rpm)
3.34 / 107
(3 kg load pre-drained at 1200 rpm)
1.33 / 48
Implementation
off
position
Value