Table of Contents
Advertisement
[Setting of Contact Signal Input]
• For input contact closure only(No power input)
Notes
Do not input the voltage signal in
"NON VOLT" setting mode otherwise
it will cause serious damage
• For input contact voltage : DC 12 V, 24 V~
Setting_SW Setting
• Normal (0) : Possible to be controlled by the remote controller.
• Forced (1) : Not possible to be controlled by the remote controller.
• There is no OPER_SW setting that each input signal is disabled.
Connect separate
External voltage of
DC 12 V, 24 V~
ACCESSORIES INSTALLATION
Thermostat
LG does not
supply this section
(Field supply)
Thermostat
LG does not
supply this section
(Field supply)
95
Advertisement
Table of Contents
