(11)
EEPROM test
<EEPROM Clearing Cancel> Press "
<EEPROM Clear> Press " OK" or wait 15 seconds. EEPROM
data will be cleared.
During the process , the numbers will be indicated on where is
located with "(A)".
If "(A)" has value of "999", EEPROM is in faulty condition.
* In case "(A)" has "999", the process does not proceed to next
step.
(12)
Watchdog Timer test
The remote controller will automatically start to check the watchdog
timer. After 10 seconds are passed, the self checking is completed
and the remote controller is automatically restarted.
If does not restart, this check is in faulty condition.
(13)
When the self checking is completed, the remote controller is
automatically restarted.
In this case, "Connecting" is indicated and operation indicator will
fl ash in red. So please turn the circuit breaker OFF and ON.
EEPROM process
(14) Clear EEPROM
The remote controller will automatically restart EEPROM clearing
process.
(15)
Watchdog Timer test
The remote controller will automatically start to check the watchdog
timer. After 10 seconds are passed, the self checking is completed
and the remote controller is automatically restarted.
If does not restart, this check is in faulty condition.
(16)
When the process is completed, the remote controller is
automatically restarted.
In this case, "Connecting" is indicated and operation indicator will
fl ash in red. So please turn the circuit breaker OFF and ON.
".
– 16 –
(A)