Limit Operation - Hitachi SPX-WKT2 Manual

1.4 LIMIT OPERATION

Setting temperature range can be changed.
1 Select "Limit Operation" from the service menu
and press "OK".
The limit operation setting will be displayed.
2 Press " " or " " to select the setting items.
The setting items are displayed "Limit Setting",
"Cool-Dry", "Heat" and "Auto".
3 Press " " or " " to set each setting content
for the selected item. When "Limit Setting" is
selected, the setting contents are switched in
order of "Not Used"
" " or " ". When "Cool-Dry" or "Heat" or
"Auto" is selected, the setting temperature (lower
limit or upper limit) can be set every 1 degree
by pressing " " or "
4 Press "OK" to fi nish the limit operation setting.
The confi rmation screen will be displayed.
"Used" by pressing
".
5 Select "Yes" by pressing "
"OK".
The setting will be confi rmed and the screen will
return to the service menu.
6 Press "
normal mode.
NOTE:
The limit operation setting will remain unchanged
●
after the unit is turned off.
– 5 –
" or " " and press
" (return/help) to return to the