Eco Auto Off - Hitachi SPX-WKT2 Manual

1.12 ECO AUTO OFF

This function is only available in the model with human detected sensor. When this function is set, the unit will
be stopped automatically after set "Auto off time" when nobody is in the room at the eco mode setting.
1 Select "ECO AUTO OFF" from the service menu
and press "OK".
The ECO AUTO OFF setting will be displayed.
2 Press " " or " " to select the setting items.
The setting items are displayed "ECO AUTO
OFF" and "Auto off time".
3 Press " " or " " to set each setting content
for the selected item. When "ECO AUTO OFF"
is selected, the setting contents are switched
in order of "Not Used"
" " or " ".
When "Auto off time" is selected, the setting time
can be set between "20 min" and "120 min" by
pressing " " or "
10 min.)
4 Press "OK" to fi nish the ECO AUTO OFF setting.
The confi rmation screen will be displayed.
"Used" by pressing
" cyclically. (The set unit is
5 Select "Yes" by pressing "
"OK". The screen will return to the service menu.
6 Press "
normal mode.
NOTE:
The ECO AUTO OFF setting will remain
●
unchanged after the unit is turned off.
7 When the ECO AUTO OFF setting is used, the
screen indication will be below.
(1) If "Eco Auto Off" setting is used, when "Eco"
operation is started, "
indicated on the screen of normal mode.
(2) "ECO Auto Off Mode" will be indicated on the
screen of normal mode when the operation is
stopped by "ECO AUTO OFF" function.
– 13 –
" or " " and press
" (return/help) to return to the
" and " " will be