Advertisement
LD/CDV/CD
TO PLAY ONLY
DESIRED
SCENES/TRACKS
- Program Playback
Selected chapters (LD) or tracks (CDV/CD) can be played in
any desired order (max. 24 chapters or tracks).
1. Press PGM.
1a,
2. Enter the track No. with the DIRECT MUSIC SEARCH
buttons on the front panel or with the digit buttons
on the remote control unit.
Example: To play CD tracks No. 9, No. 7, and No. 18
respectively.
Display with a disc containing a TOC
3 0.12
PLAY
TOTAL TIME
0 0.00
PROGRAM
STE
After approx. 1 second
3 0,32
PLAY
PROGRAM
STEP-4
TOTAL TIME
3 8.30
TEL
\
09
>.
With two-sided LDs, first specify side A or side B with DISC
SIDE A or B and then enter the number of the desired
chapter with the digit buttons.
Example: To program chapter 9 on side B, chapter 7 on
side A, and chapter 18 on side B, in that order.
IRR BL RRR
Screen display after
programming is completed
3 0.12
A PLAY
PROGRAM
STEP- 4
BOS AQ7 B18>--
--
Apause between tracks/chapters can also be programmed
by pressing PAUSE 4 instead of the digit buttons.
if you make a mistake during entry:
Press CLEAR on the remote control unit and enter the
correct number with the digit buttons.
3. Press >/Hi or PLAY &.
PLAY/PAUSE
22
<VRE1048>
En
@ You can view the state of programming on the monitor
TV screen.
| To check the program contents
During program playback or in stop mode, press PGM to
display the program contents on the monitor screen. When
PGM is pressed again, the program contents disappear.
To modify the program contents
To delete or change a programmed chapter/track or pause:
1. Press PGM.
2. Press CLEAR.
Each press of the button clears the currently last chapter/
track in the program.
@ |tisnotpossible to clear the chapter/track being played and
the chapters/tracks located programmed them.
| To clear the program playback
Press CLEAR to return to normal playback.
To clear the program contents:
@ Open the disc table.
e@ Press CLEAR in stop mode.
Advertisement
