Advertisement
CONVENIENT FUNCTIONS FOR PLAYING AN LD, CDV OR CD
@<@ P|
Chapter (Track) Skip ~ To search for the beginning of a chapter/track
LD/CD/CDV
Press a button repeatedly or hold it depressed; the chapters
Searches for
:
.
beginning of the
the beginning
{tracks) will be skipped successively.
chapter (track)
of the next
currently playing.
chapter (track}
<@il 11
Still frame and Frame -by-Frame advance function (CAV disc only)
'
LD
"au STEP up
Press repeatedly for frame-by-frame advance.
Reverse
Forward
<@<q >B
Scan (Manual Search) - Search using fast forward or fast reverse
Press for
Press for
fast-reverse
fast-forward
operation
operation
Normally Low Scan and High Scan is performed.
To
perform Clear Scan, press DISPLAY
on the remote
control unit to display the screen and then press <# or
be. For about two seconds after the button is pressed,
Low Scan is performed, after that, the unit enters High
Scan.
Low Scan mode: Scan speed becomes about x10 of the
normal playback speed.
High Scan mode: Scan speed becomes about x30 of the
normal playback speed.
Clear Scan mode: The image may not fluctuate in this
mode.
@ With some TV systems, the picture may be fluctuated
during clear scan operation; this is not malfunction.
@ With video part of CDV, High Scan mode cannot be
carried out.
@ In Clear Scan mode, when digital sound is selected with
digital audio discs, sound is heard at a low volume level.
® With CDs or audio part of CDVs, sound is heard at a low
volume level while scanning.
@ Others: Sound is muted.
@ The screen image may be disturbed during scanning, but
this is not a malfunction.
LD/CDV/CD
TO SEARCH FOR A PARTICULAR TIME/FRAME
Frame Number Search/Time Number Search
Frame Number Search (CAV discs only)
~ To search by designating the frame number
Any desired frame can be searched for by specifying its frame
number.
1. Press CHP/TIME during playback.
2,
Enterthe required frame number with the digit buttons
(0 - 9).
3.
Press >/ii or PLAY >.
Time Number Search (CLV disc only)
- Example: To search for the scene located at 12
min. 34 sec
1. Press CHP/TIME during playback.
2. Enter [1], [2], 3) and [4] with the digit buttons.
3.
Press >/ii or PLAY ».
CAUTION:
tf a disc does not contain information in seconds, specify the
time number only in the minutes.
When PLAY » on the remote control unit is pressed to start
search operation:
Asitill frame is displayed (CAV). To start normal playback, press PLAY
»® again.
Notes on searching for a chapter/track:
e@ /f you make a mistake in pressing the digit buttons, press CLEAR
and press the correct digit buttons.
@
TheEid
button does not function.
To exit search mode:
Press CLEAR. Normal playback starts.
"
<VRE1048>
En
Advertisement
