Table of Contents
Advertisement
#
Cleaning the 12 V Battery Terminals
Remove the 12 V battery.
1.
If the terminals are starting to corrode and
2.
are coated with a white substance, wash
with warm water and wipe clean.
If the terminals are heavily corroded, clean
3.
and polish the terminals with a wire brush or
sandpaper. Wear safety glasses.
After cleaning, reinstall the 12 V battery.
4.
The 12 V battery has a limited life span. Consult
your authorised dealer about when you should
replace the 12 V battery. Always replace the 12
V battery with another maintenance-free 12 V
battery of the same type.
P. 83
2
Maintenance Fundamentals
NOTICE
Installing non-Honda electrical accessories can
overload the electrical system, discharging the
12 V battery and possibly damaging the system.
Fuses
Fuses protect the electrical circuits on your
scooter. If something electrical on your scooter
stops working, check for and replace any blown
fuses.
P. 127
2
#
Inspecting and Replacing Fuses
Turn the ignition switch to the
to remove and inspect fuses. If a fuse is blown,
replace with a fuse of the same rating. For fuse
ratings, see "Specifications."
Blown fuse
(Off) position
P. 146
2
Continued
75
Advertisement
Chapters
Table of Contents
