Honda WW150HV 2018 Owner's Manual page 47

#
Adjusting the Sensitivity of Anti-theft
Alarm System
You can select from 3 sensitivity levels for the
anti-theft alarm system.
Make sure that the Honda SMART Key
a
system is activated.
Remove the 12 V battery cover.
b
Push the ignition switch to authenticate the
c
Honda SMART Key system.
Connect the EM mode coupler provided in
d
the tool kit to the EM mode connector.
(P.120)
The Honda SMART Key indicator and
u
ignition switch ring go off.
Alarm button
(P.33)
(P.84)
(P.37)
Ignition switch
Ignition switch ring
Push the ignition switch 1 time.
e
Repeat this step 3 times as follows:
f
Press the alarm button on the Honda
SMART Key 2 times and the ignition
switch 1 time.
When the alarm button is pressed, the
u
LED on the Honda SMART Key comes
on. Make sure the LED went off before
the next button pressing.
If the alarm button or ignition switch is
u
not pressed for 1 minute, the Honda
SMART Key indicator starts blinking and
this mode will be cancelled. If so, remove
the EM mode coupler, return to
follow the procedure again.
and
c
Continued
43