Advertisement
1.Select the desired ITS play mode (repeat
mode). (See page 24.}
2.Hold down button ® in Bank [14] for
more than 2 seconds. ("ITS.P" appears
on the display [47}.) To cancel ITS play,
hotd down button @ in Bank [14] again.
("ITS.P* disappears.)
When you play a disc that has no tracks
programmed, "EMPTY" will appear on
the display [47] for about 2 seconds, indi-
cating that ITS play is not possible.
You can perform scan play or random
play during ITS play. In this case, scan
play or random play applies to all the
tracks stored in memory. {If the play
made is the magazine repeat mode or all
repeat mode, scan play applies to all the
tracks of the discs.in the magazine stored
in memory.)
During ITS play, mutti-play CD players
containing discs with programmed tracks
are switched, and disc and track number
search is performed on programmed
tracks.
Erasing the TS Program
You can erase one or all selections of the
program for the disc being played by !TS.
To erase a single selection:
4.Start ITS play. (See page 26.)
2.Play the track you wish to erase by using
disc number search or track number
search.
3.Hold down button @ in Bank [14] for
more than 2 seconds.
To erase the disc program:
1.Start normal play.
2.Piay the disc you wish to erase by using
disc number search.
3.Hold down button © in Bank [14] for
more than 2 seconds to erase the pro-
gram. {"CLEAR" appears on the display
(47) for about 2 seconds.)
Pausing
1.Press button @ in Bank [14] to. pause dur-
ing disc playback {"PAUSE" appears on
display [47]}.
2.Press button ® in Bank [14] again to re-
lease pause.
+ You can select a track using the track
number search during pause. ("PAUSE"
is off while a track is being searched.)
When the track search ends, the found
track is paused at its beginning.
Disc Title Input
You can enter a title for the disc in the
multi-play CD player. The title stored for the
disc can be displayed.
+ The ADPS function* of the multi-play CD
player lets you enter titles for up to 100
discs. (Up-to 100 discs, including ITS, can
be programmed (see page 26).)
*ADPS: Automatic Disc Program Selection
+ Adisc title can consist of up to 8 charac-
ters for a single disc.
+ When the number of discs exceeds 100,
discs not being played (information not
being renewed} in memory is overwritten
by the newest.
+ One title is stored for each disc. The title
stored for a disc is.not erased after the
disc is changed.
a7
HSD
Advertisement
