Advertisement
Parts Identification
Fig. 2
176] Learn Button
Takes on the same function as the button
recorded with the learn function. Refer to
the saction "Learning Function" for details.
[18] Shift
Each press of button changes the display
and the function of button [1] and [19] as
follows: Volume — Fader (Balance) — Bass
(Treble) -- F. |. E. mode.
Each time you press and hald down this
button for 2 seconds or longer, the Source
Level Adjuster mode turns ON or OFF,
[21] Volume
Press the (+) side to increase volume and
the (-) side to decrease volume.
[221 Tape, Tunner
If this button is pressed to switch the tunner
power on. When the cassette tape is insert-
ed, the source changes at each press of this
button :
Tape — Radio — OFF
[23] CD, M-CD
Unit goes to CD play. Press again to turn
OFF.
+ The function only works when this unit is
connected to a separately sotd Multi-Play
CD player (CDX-P1210, CDX-P610).
20
125] Attenuator
Press to reduce the volume to 1/10 of its
current setting (The "ATT" display blinks.}.
P
+ This function is available using the re-
mote controller unit only.
Operating Radio
[17] Band
Band changes.
[19] Preset Channel
Press to tune the frequencies assigned to
the preset button memory. Pressing the (a)
side tunes in the next high preset button
number, while (y) tunes in the next lower
preset button number. The preset number
changes at high speed when you hold ei-
ther side of this button down.
[20] Seek Tuning
Press either the (4) side or the (>>) side.
When the (»®) side is pressed, the tuner
will automatically receive high frequencies.
When the (#4) side is pressed, it will auto-
matically receive low frequencies.
[24] BSM
Press this button for 2 seconds or more to
'switch the BSM function ON and OFF.
Operating Tape
[171 Program
Press this button to change the side of tape
from A to B ot vice versa.
[20} Fast Forward/Rewind
Press the (»*} side for fast forward and the
(#4) to rewind the tape. Press this button
twice to perform the music search opera-
tion, and a third time to return to normal
playback,
Operating the CD Player
+ This function only works when this unit is
connected to'a separately sold multi-play
CD player (CDX-P1210, CDX-P610).
[18] Multi-play CD player selector
Multi-play CD player changes..
+. This function only works when this unit is
connected to 2 or more multi-play CD
players.
[19] Dise Number Search
Used to specify the number a disc loaded in
the magazine. Press the (a) side to increase
the disc number on the display, and the (¥)
side to reduce the disc number.
(20) Track Number Search
Press to search for a selection (track nium-
ber) on the current disc. Press the (i) side
to increase the track number on the display,
and the (#4) side to reduce the track num-
ber. Holding down either side of this button
changes the track number at high speed.
Advertisement
