Advertisement
Precautions
+ Do not touch the contacts on the front
panel or on the unit body, since this may
result in poor electrical contact. If dirt or
other foreign substances get on the con-
tacts, wipe them with a clean, dry cloth.
(Fig. 25) (Fig. 26)
Fig. 25
Fig, 26
Precautions When Handling the
Front Panel
+ Do not leave the front panel in any area
exposed to high temperatures ar direct
sunlight.
Oo not drop the front panel or otherwise
subject it to strong impact.
Do not allow such volatile agents as
benzine, thinner, or iiisecticices to come
into coritact with the surjece of the font
panel.
Neve: try to
seribte the front panet
Using the Clear Button
Once all wiring is complete, press clear but
ton with a thin, pointed object. Though noi
anormal occurrence, the microprocessor
which controls the operation of this unit
can be affected by electrostatic noise. This
generally i
icated by such sympioms as
no power,being supplied when you swi
the unit on, failure of buttons and contro!
ot an abnormal display. Should this ha;
pen, press clear button with a thin, point:
object to reset the microprocessor.
+ The clear button can be located on the
unit after you have removed the front
panel. (Fig. 27)
Refer to the previous page to find our
how to remove the front panel.
Clear Button
Adjusting Volume and Tone
Parts Identification
Fig. 1
11] Volume/Audio adjustment
i3] Cassette door
15) Eject
17]. Loudness ON/OFF
110] Display
(11) Source selector
114] @ AUX ON/OFF
115] Shift/Source level adjuster
Switching Power On
Radio
Press button [11] to switch the tuner power
on. Press button [11] again to switch the
power off,
fape
insert the cassette tape through the cas-
sette door [3], and the power will be auto-
inatically turned on to start the tape being
played back. To eject the tape, press bulton
{5}.
Changing the Source
When the cassette tape is inserted, the
source changes at each press of the button
{11}: Tape ~ Radio ~ OFF.
When an optional muti-play CD player
(CDX-P1210, CDX-F610) is connected to
your tinit, the source changes as follows:
Tape — Radio — Multi-play CD player ~~
'other audio component is connected to the
i BUS terminal with an optional conversion
coud, set the AUX to ON by doing as follows,
13
HSTI
Advertisement
