Paradyne 3615 Quick Reference Manual page 9

Connecting to the Dial (or PSTN) Network
If your DSU is equipped with a V.32 DBM, follow these steps to connect it to the dial
network.
Procedure
1. Plug either end of the dial (analog) interface cable into the DSU jack labeled
BACKUP.
— For permissive service, use a telephone cord with an 6-pin modular RJ11C
plug.
— For programmable service, use a telephone cord with an 8-pin RJ45S plug.
2. Plug the other end of the cable into the modular jack provided by the telephone
company, USOC RJ11C (permissive) or USOC RJ45S (programmable).
3. If your site has programmable service, verify that the DSU's hardware strap S1-1 is
switched to the Off position.
Model 3615 DSU Dial (PSTN) Network Connection
7