Paradyne 3615 Quick Reference Manual page 15

Verifying DBM Operation
A backup connection must be established to verify that the switched network is
functioning. Then, perform the Digital Test by selecting the DBM path.
Procedure
1. Select Local (F1).
2. Select Bckup (F2).
3. Select Dial to establish a dialed call to the tributary.
Refer to Chapter 4 of the User's Guide for the procedure for entering telephone
numbers.
4. Press the key, then select
5. Press the key twice.
6. Select Test (F3).
7. Select DBM (F2).
8. Select DT (F3).
9. Select Start (F1).
10. Select the amount of time you want the test to run in hours: minutes: seconds
(hh:mm:ss).
— Press the
changed.
— Press the F1 ( ) key to increment the digit (1 through 9).
— Press the F2 ( ) key to decrement the digit.
11. Select Enter (F3). Please wait appears as the DBM runs the test.
12. When Command Complete appears, press the
13. Select Displ (F1) to display the results of the test.
14. Press the key to scroll through the test results.
Cnnct to switch to the dial circuit.
or key to move the blinking cursor to the digit to be
13
key.