Configuration Options - Paradyne 3615 Quick Reference Manual

Configuration Options

Configuration options are accessed from the Configuration branch of the front panel
menu.
In the following tables, factory defaults are shown in boldface type.
Key to symbols:
Switched 56 DBM only
2-wire Switched 56 DBM only
V.32 DBM only
Only if Call Setup set to Pswrd
Only if Diag Type set to NonD
Only if Primary Core set to Yes
Only at the Control
Hardware Straps
DDD Interface
Frame Ground/Signal Ground
V.35 Test Mode Indication
EIA-232-D Test Mode Indication
–48 Vdc Alarm Monitoring
–48 Vdc Alarm Monitoring via NMS
Adapter Cable
DSU
Rate(Kbps)
TxClkSource
19.2 PowrLvl
64KScramblng
64KLatchLpbk
V.54 Lpbk
Permissive, Programmable
Connected, Disconnected
Enabled, Disabled
Enabled, Disabled
Enabled, Disabled
Enabled, Disabled
64CC, 64L, 56, 38.4, 19.2, 9.6, 4.8, 2.4
Int, RXC, Ext, DDS
+ 6, 0, –10
On, Off
On, Off
Enab, Disab
15
Value
Value