Paradyne 3615 Quick Reference Manual page 16

Verifying Network Addresses
Access the DSU's identity (ID) subbranch for the tributary DSU to ensure that the DSU
is properly addressed.
Procedure
1. Select Remot (Remote branch).
2. Enter the tributary's network address.
3. Select Stat (Status branch).
4. Press the key until ID appears.
5. Select ID.
6. Press the key until Network Addr appears.
7. Verify that the correct address has been entered.
Verifying the Network
Perform a Health and Status check on the DDS circuit to ensure that the network is
functioning.
Procedure
1. Select Local (F1).
2. Select Stat (F1).
3. Select H/S (F1).
4. Select Devic (F1).
5. Press the key to return to the top-level menu.
6. Select Local (F1).
7. Select Bckup (F2).
8. Select DrBU to drop the backup call.
No error messages should appear.
14