Paradyne 3615 Quick Reference Manual page 13

3. Connect the plug end of the router's EIA-232 cable to the DSU's EIA-232-D/V.24
connector.
Tighten any holding screws.
4. Connect the other end of the router's EIA-232 cable to the router:
— If the DSU is to be configured using the SyBC or SyBT configuration, connect
to the router's secondary serial port.
— If the DSU is to be configured using the DiDg configuration, connect to the
router's console port.
Tighten any holding screws.
DSU
Low Voltage
AC Power In
(Control Device
EIA-232-D/V .24
Interface
V .35 Interface
CC
To NMS
Only)
Router Connection
11
DiDg Configuration:
To Router
Console Port
(Router-Management
Data)
SyBC OR SyBT
Configuration:
To Router
Secondary Serial Port
(Backup Or Overflow
Data)
To Router
Primary Serial Port
(User Data)
99-16248