Kenwood TM-701A Instruction Manual page 12

LCD DISPLAY PANEL
@ LOCK On when the LOCK function has been ac-
tivated.
@- + Displays the selected transmitter offset
-- direction.
(European version)
@® REV On when the Reverse function has been
activated.
@® AL On when the Priority Alert function has
been activated.
®T On when the Tone Encode function is active.
CTCcss On when the Tone Decode function is
active.
g On when the Tone Alert function is active.
The indicator flashes when an incoming
signal has opened the squelch.
12
(O) 2888 88s Displays the operating frequency to the
nearest kHz digit; the frequency step size;
or the tone frequency.
The indicator flashes when scanning.
© sy On when the squelch opens.
(©) ——_2! This level meter indicates the relative
receiver signal strength or the relative
transmitter power output.
@ re a 0n whenever the F key has been
| |depressed. Also shows the last memory
. — — — — channel number that had been selected.
@° ~~~ 4 The indicator is on whenever the dis-
| * | played memory channel will be skipped
. "" _ __ j during memory scan operations.
On during transmit.
On during duplex operations.
Indicates the relative output power setting
for transmit. No indicator indicates full
power.