Paradyne COMSPHERE 3610 Replacement Manual page 6

COMSPHERE 3600 Series Data Service Units
For Digital Data Service (DDS) installations, inform the local telephone company of the
appropriate facility interface code for the service you desire.
The DDS Service Order Number is 6.0Y. The jack configurations required are RJ48S for the
Model 3610 DSU and RJ48T for the Model 3611. With the Model 3611 RJ48T configuration, you
must specify the number of data lines you require. Refer to Chapter 1,
For DBM installations, the proper service and jack must be ordered from the telephone company.
Refer to the following table for this information.
DBM Type
(Standalone)
12.0 or 14.4 kbps RJ11C Permissive
V.32bis DBM RJ45C Programmable
V.34 DBM RJ11C Permissive
2-Wire Switched SJA48
56 DBM
4-Wire Switched SJA56
56 DBM
ISDN BRI DBM SJA11
After the telephone company has installed the requested service and jack, you can connect the
DSU with the cable provided. An FCC-compliant telephone cord and modular plug are provided
with this equipment. This equipment is designed to be connected to the telephone network or
premises wiring using a compatible modular jack that is Part 68 compliant.
E
Interface
04DU5-24
04DU5-48
04DU5-96
04DU5-19
04DU5-38
04DU5-56
04DU5-64
DBM Jack Installation Requirements
USOC Jack USOC Jack
(Carrier-Mounted)
RJ21X Permissive
RJ27X Programmable
RJ21X Permissive
SJA48 (uses an
adapter cable)
SJA57
SJA11 (uses an
adapter cable)
DDS Facility
Data Rate
Code (bps)
2400
4800
9600
19,200
38,400
56,000
64,000
Canadian Jack
(Standalone)
CA11A Permissive
CA27A Programmable
CA11A Permissive
CA11
(metallic channel)
Not available
in Canada
CA-A11
December 1996
Technical Specifications.
Canadian Jack
(Carrier-Mounted)
CA21A Permissive
CA27A Programmable
CA21A Permissive
CA21A
(metallic channel)
Not available
in Canada
CA-A11 (uses an
adapter cable)
3610-A2-GB43-50