Specifications - Sanyo HTD-5201 Instruction Manual

Hide thumbs Also See for HTD-5201:
Table of Contents

Advertisement

SPECIFICATIONS
HTD-5201M: Main unit with main speaker
General
Output power:
Total power
90 W
Main amplifier
30 W x 2 (at 6 ohms, 10% distortion)
Subwoofer amplifier
30 W (at 6 ohms, 10% distortion)
Inputs
VIDEO:
VIDEO IN: 1.0 Vp-p (75 ohms)
AUDIO IN: 600 mV/50k ohms
AUX/TV: 600 mV/50k ohms
Outputs
SPEAKERS:
6 ohms/Main, 6 ohms/Subwoofer
PHONES:
8 - 32 ohms
DIGITAL OUT:
Optical
AV EURO CONNECTOR:
For Euro-AV cable
MONITOR VIDEO OUT:
1.0 Vp-p (75 ohms)
AUDIO OUT:
600 mV (1 kohm)
S-VIDEO OUT:
Y: 1.0 Vp-p (75 ohms) NTSC, 1.0 Vp-p (75 ohms) PAL
C: 0.286 Vp-p (75 ohms) NTSC, 0.3 Vp-p (75 ohms) PAL
Power requirements:
AC 230 V, 50 Hz
Power consumption:
100 W
1.4 W (standby mode)
Dimensions:
200(W) x 400(H) x 320(D) mm
Weight:
8.7 kg
DVD/CD player
Type:
DVD/CD player
Playback standard:
PAL or NTSC
Laser:
Semiconductor laser, wavelength: 650 nm
Laser output (Continuous wave max.):
1 mW (DVD)
0.5 mW (CD)
Frequency range (digital audio):
4 Hz to 44 kHz (DVD fs: 96 kHz)
Signal to noise ratio:
More than 105 dB
Harmonic distortion (digital audio):
0.003 %
Wow and flutter:
Below measurable level
Main speaker (magnetic shield)
Unit used:
10 cm cone type
Maximum power-handling capacity:
60 W (peak)
Nominal impedance:
6 ohms
SX-5201: Main speaker with subwoofer
Main speaker (magnetic shield)
Unit used:
10 cm cone type
Maximum power-handling capacity:
60 W (peak)
Nominal impedance:
6 ohms
Subwoofer (magnetic shield)
Unit used:
13 cm cone type
Maximum power-handling capacity:
60 W (peak)
Nominal impedance:
6 ohms
General
Dimensions:
200(W) x 400(H) x 320(D) mm
Weight:
5.8 kg
Specifications subject to change without notice.
IMPORTANT INFORMATION
Because its products are subject to continuous improvement, SANYO
reserves the right to modify product designs and specifications without
notice and without incurring any obligation.
17

Advertisement

Table of Contents
loading

Table of Contents