Sanyo HTD-5201 Instruction Manual page 14

Hide thumbs Also See for HTD-5201:
Table of Contents

Advertisement

<l»)
DIGITAL OUT:
ON
ON
(Note: It is "ON" only.)
AUDIO
Dolby Digital:
2ch
5.1ch
2ch
Select PCM "2ch" or Dolby Digital "5.1ch'
MPEG:
PCM
MPEG
PCM
Select PCM or MPEG signal.
DTS:
OFF
ON
Select DTS signal "ON" or "OFF".
OFF
Note:
When using a Digital Amplifier without a DTS decoder, set DTS to "OFF".
a
PARENTAL
Enter password.
Enter a number in 4 digits, then press ENTER.
(To confirm, enter password again, then press
ENTER.)
i Invalid password.
1 Enter password again.
L. _ _ _ _ _ _ — _ _ _ _ _ _ — -
LEVEL:
8
8
7
6
5
4
3
2
1
OFF
Parental control
MPAA (Motion Picture Association of America) Guideline is rating system
that provide advance cautionary information to parent about the content
of movie programmes.
The parental lock level is equivalent to the following MPAA Rating System.
Level 7: NC-17 (No one 17 and under admitted)
Level 6: R (Restricted)
Level 4: PG13 (Parental guidance cautioned)
Level 3: PG (Parental guidance suggested)
Level 1: G (General audiences)
Some DVD discs contain a restriction level which enables parents to
prevent playback of discs by children. This DVD player is equipped with
a password designed to prevent children changing the level.
You cannot play DVD discs rated higher than the level you selected unless
you cancel the parental lock function.
For example, when you select level "5", the player will not play discs with
ratings of "6", "7" or "8". The information will appear on the TV screen.
STANDARD:
USA
USA
CHANGE PASSWORD
Change password.
Enter a number in 4 digits, then press ENTER.
If you forget the password...
Enter "788444" to clear the current password.
Enter a new password and set the parental lock level again.
Note:
DVD discs may or may not respond to the parental lock settings. Make
sure this function works with your DVD discs.
To confirm, enter password again, then press
ENTER.
To lock the disc tray
You can lock the disc tray to prevent misuse of young children.
Enter password "123456" to set the disc tray lock mode.
The A OPEN/CLOSE button will not function.
To release this mode, enter the same password again.
13

Advertisement

Table of Contents
loading

Table of Contents