Parking The Machine; Transport And Lifting Procedures - Faraone E5 ES Use And Maintenance Instructions

1. Drive the machine to a well-protected and ventilated area.
2. Make sure the cage is completely lowered, press the emergency stop/switch-off button with
the removable key and take out the key.
NOTE: if necessary, charge the batteries in preparation for the following workday.
PREVENT UNAUTHORISED USE BY SWITCHING OFF THE MACHINE AND REMOVING THE
KEY WHEN THE AERIAL PLATFORM IS NOT IN USE.
General information
It is possible to transport the machine to the work premises using one of the following methods:
By driving the machine along the route on its base wheels, if the surface it travels on permits it;

By moving it with a forklift (see the picture below – check the gross weight in the Operational

Technical Data Table of the machine).
LOAD THE MACHINE, ONLY IN A VERTICAL POSITION, ONTO A HEAVY DUTY VEHICLE
HAVING A USEFUL LOAD CAPACITY THAT WITHSTANDS THE TOTAL WEIGHT OF THE
MACHINE (CHECK THE GROSS WEIGHT IN THE OPERATIONAL TECHNICAL DATA TABLE
SECURE THE MACHINE SO THAT IT DOES NOT GET DAMAGED DURING TRANSPORT.
AERIAL PLATFORM E5 ES – Rev. 00_2020

PARKING THE MACHINE

CAUTION

TRANSPORT AND LIFTING PROCEDURES

CAUTION
OF THE MACHINE)
CAUTION
USE AND MAINTENANCE MANUAL - SECTION 4
Page 4-8