Stall Calculator - Graco LineLazer V 3900 Standard Series Operation

LineLazer V LiveLook Display

Stall Calculator

Stall Calculator is used to set the stall size. The striper
divides the measured length by the stall size to
determine the number of stalls that will fit in the length
measured. User can adjust number of stalls to a round
number and stall width is calculated.
1. Use to select Layout Mode. Press
open Stall Calculator Menu.
1
8
Ref. Description
1 Opens Angle Calculator Menu.
See Angle Calculator, page 41.
2 Exits and returns stall size to Layout Mode.
3 Measured distance.
4 Calculated # of stalls. Changing the number of
stalls will change the stall size.
5 Adjusts number of stalls.
6 Stall size. Changing stall size changes the
calculated # of stalls.
7 Adjusts stall size.
8 Press to start measurement, Press to stop
measurement.
40
to
2
3
4
5
7
6
ti27848a
2. The most recent length measured in Measure Mode
is automatically displayed. Press gun trigger control
to start a new measurement. Press again to stop
measuring.
Stall size and calculated number of stalls are both
adjustable.
3. Press to return to Layout Mode. The Stall size
is saved and displayed on the Layout Mode screen.
ti27917a
4. Press and release gun trigger control to start
marking dots. Press and release gun trigger control
again to stop.
3A3388H Operation