Paradyne COMSPHERE 3550 Series User Manual page 67

Front Panel (DCP) Security
NOTE
This page can be removed to
prevent unauthorized persons
from learning about the security
access levels and their selection.
The Model 3550 diagnostic control panel (DCP) and
Model 3551 shared diagnostic control panel (SDCP) have
two levels of security access, as shown in Table 4-8.
Table 4-8
Security Access Levels
Security
Functions Available
Access Level
Unlock All
Lock Local branch only:
S Status branch
S Configuration branch:
Display only (no changes)
S Control branch:
Display External Leads only
(no changes)
The 3550 Series DSUs are shipped from the factory
with the security level set to Unlock. When the DCP is
locked, only the Local branch appears on the control
DSU.
3550-A2-GB20-40
If the security has not been set on the DCP before, the
following appears:
FP Access:
Lock
To select the security level:
"
Procedure
1. Press the
top-level menu.
2. Press the
three seconds. The following menu appears:
FP Access: Unlock
Lock
3. Select the security level:
Lock – To restrict access
Unlock – To provide full access
Press the appropriate function key (F1 or F2).
4. Select Save (F3).
July 1999
Operating the DSU
? ? ?
Unlock Save
F1 F2 F3
key to ensure that you are at the
and keys simultaneously for
Unlock Save
F1 F2 F3
4-21