Related Manuals for Milwaukee MX FUEL MXF DCD350
Summary of Contents for Milwaukee MX FUEL MXF DCD350
- Page 1 OPERATOR'S MANUAL Cat. No. MXF DCD350 MX FUEL™ SUPER CORE DRILL WARNING To reduce the risk of injury, user must read and understand operator's manual.
-
Page 2: General Power Tool Safety Warnings
• Remove any adjusting key or wrench before GENERAL POWER TOOL turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury. - Page 3 Maintain labels and nameplates. These carry SPECIFIC SAFETY RULES FOR • important information. If unreadable or missing, CORING EQUIPMENT contact a MILWAUKEE service facility for a ® •When performing drilling that requires the use of replacement. water, route the water away from the operator's...
-
Page 4: Functional Description
FUNCTIONAL DESCRIPTION 1. Back handle 13. Bit removal device 26. MX FUEL™ spare battery holder 2. Mounting plate 14. Water valve 27. Wheel assembly 3. Gear selector 15. Front handle 28. Wheel (2) 4. Water quick-connect 16. Handle 29. Eye bolts (4) 5. -
Page 5: Specifications
SPECIFICATIONS ASSEMBLY Drill Cat. No........MXF DCD350 Recharge only with the charger WARNING Battery Type ........MX FUEL™ specified for the battery. For Charger Type........MX FUEL™ specific charging instructions, read operator's manual supplied with your charger Rated No Load RPM ........ 0 - 2,200 and battery. -
Page 6: Operation
Use vacuum pad or expansion-type anchor to fix Press in the feed handle the position of Stand. Set the anchor according to button and insert the feed expansion-type anchor manufacturer handle into one of the handle locations. Release instructions. button. Ensure handle clicks into place. - Page 7 Mounting the Core Drill to the Stand bit and one on the flats on the shaft. Use only a MILWAUKEE ® WARNING Diamond Core Bits FUEL™ Core Drill with this stand.
-
Page 8: Digital Level
"Ideal core drill when installing into a core Pressure", the clutch needs to be serviced. Return drill stand. The four red arrow LEDs the Drill to the nearest authorised MILWAUKEE ® indicate where the machine is not service centre. -
Page 9: Performance Indicator
12. To start the machine, switch to the ON position. work properly, return the machine, charger and Use light feed pressure until the bit crown has battery pack, to a MILWAUKEE service facility for ® penetrated or "seated" into the material. Once repairs. -
Page 10: Maintenance
If the machine still does not To reduce the risk of injury, work properly, return the machine, charger and WARNING always unplug the charger and battery pack, to a MILWAUKEE service facility for ® remove the battery pack from the charger or repairs. - Page 11 Repairs For repairs, return the tool, battery pack and charger to the nearest authorised service centre. ACCESSORIES Use only recommended accesso- WARNING ries. Others may be hazardous. For a complete listing of accessories, go online to milwaukeetool.com.au / milwaukeetool.co.nz or contact a distributor.
- Page 12 Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...