GENERAL POWER TOOL • Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from SAFETY WARNINGS moving parts. Loose clothes, jewelry or long hair can Read all safety warnings, instruc- WARNING be caught in moving parts. •...
130°C (265°F) may cause explosion. your capability; contact Milwaukee Tool or a trained • Follow all charging instructions and do not charge professional for additional information or training.
2. Raise the mast(2) upright fore installing the drill. to the desired angle. Use a MILWAUKEE® MX FUEL™ Core Drill with 3. Tighten the angle brace this stand. handle(3) securely. If 1. To mount the drill, loosen the mount plate handle(1).
Some building materials contain steel reinforce- are above the bottom surface of the base. ments. MILWAUKEE® core drill bits can cut through 2. Extend the center pointer and align it with the embedded steel, but are not recommended for coring center of the hole to be drilled.
Only use a Lubricating Rack mended for this stand. Others may be hazardous. Maintain a light coat of MILWAUKEE® Type "P" or "J" Grease on the rack to reduce friction and wear when When drilling through walls or ceilings, protect the carrier is moved up and down.
Page 7
Cleaning Keep handles clean, dry and free of oil or grease. Use only mild soap and a damp cloth to clean, since certain cleaning agents and solvents are harmful to plastics and other insulated parts. Some of these include gasoline, turpentine, lacquer thinner, paint thinner, chlorinated cleaning solvents, ammonia and household detergents containing ammonia.
Page 8
Australia and New Zealand. SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...