Advertisement
INSTRUMENT AND CONTROL FUNCTIONS
1. "TRIP" button
2. Odometer/trip meter
EAU03193
Speedometer unit
The speedometer unit is equipped with
a digital odometer and a tripmeter. The
speedometer shows riding speed. The
odometer shows the total distance trav-
eled. The tripmeter shows the distance
traveled since it was last set to zero.
Pushing the "TRIP" button switches the
display between
the odometer
mode
"ODO" and the tripmeter mode "TRIP".
To reset the tripmeter, select it by
pushing the "TRIP" button, and then
push the "TRIP" button again and hold
it down for at least one second. The
tripmeter can be used to estimate the
distance that can be traveled with a full
tank of fuel. This information will enable
you to plan future fuel stops.
NOTE. © —
>
2
ax
This motorcycle is not equipped with a
tachometer; however, it has a built-in
speed limiter, which prevents the en-
gine speed from exceeding
approxi-
mately
6,800
r/min
and
the vehicle
speed from exceeding
approximately
175 km/h.
3-3
1. Dimmer switch
2. Horn switch " fey"
3. Turn signal switch "<a >"
EAU00118
Handlebar switches
EAU00121
Dimmer switch
Set this switch to "ZO" for the high
beam and to "ZO"
for the low beam.
EAU00129
Horn switch " be "
Press this switch to sound the horn.
Advertisement
