Advertisement
INSTRUMENT AND CONTROL FUNCTIONS
1. Storage compartment cover
To close the storage compartment
1. Place the storage compartment
cover in its original position as
shown.
2. Turn the key counterclockwise, re-
move
it, and then close the lock
cover.
EAU03194
Adjusting the shock absorber
assembly
The shock absorber assembly is locat-
ed under the rider seat and is equipped
with a spring preload adjusting ring.
EC000015
CAUTION:
Never attempt to turn an adjusting
mechanism
beyond the maximum
or minimum settings.
Adjust the spring preload as follows.
1. Remove
the
rider
seat.
(See
page 3-11
[XVS1100]
or
3-13
[XVS1100A] for rider seat removal
and installation procedures.)
3-15
1. Quick fastener (x 3)
2. Remove each quick fastener from
the ignitor unit panel by pushing
the center in with a screwdriver,
then pulling the fastener out.
Advertisement
