H Establishing Access Security On The Com Port - Paradyne 3166 User Manual

SDCP Operation
Establishing Access Security on the COM Port
"
3-36
Although the password feature is available, it is not required as a factory default.
If used, it ensures access security before device control is passed to a device
connected to the COM port. The default is None. The password itself is set
separately (refer to the following section,
Procedure
To establish access security on a port:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
the screen.
5. Select User.
Edit:
Chan Gen
F1
6. Press F1 (Next) until the Password configuration option appears.
7. Select Com if it to receive password control.
Password:None
Next None
F1
March 1999
Setting a Password
key until the User selection appears on
User
F2 F3
Com
F2 F3
).
3166-A2-GB20-20