Table of Contents
Advertisement
22 electrolux
To switch off Key Lock
1. Press the
key.
2. Confirm with
3
The Key Lock does not protect the ap-
pliance from being accidentally
switched off.
After the appliance is switched off, the
Key Lock is automatically cancelled.
Child Lock for the oven
As soon as the Child Lock child safety device
is activated, the oven cannot be operated.
Switching on the Child Lock
No Oven Function must be selected.
1. Press
and
until a message appears in the display.
The key lock Child Lock is in operation.
Switching off the Child Lock
1. Press
and
until a message appears in the display.
The Child Lock is now deactivated and the
oven is again ready for use.
Oven Automatic shut-off
3
If the oven is not switched off after a cer-
tain time, or if the heat setting is not
modified, the oven switches off auto-
matically.
The oven switches off at an oven tem-
perature of:
30 - 120°C
120 - 200°C
200 - 250°C
250 – max °C
Switching on again after an automatic
shut-off
Press the
button.
Meatprobe
The oven switches itself off when the core
temperature set by you is reached.
1
Important!: Only the Meatprobe sup-
plied may be used. If replacing, please
use only original replacement parts.
.
keys at the same time
keys at the same time
after
12.5 hours
after
8.5 hours
after
5.5 hours
after
3 hours
Setting Meatprobe core temperature
1.
Switch the appliance on with
2.
Push the tip of the Meatprobe right into
the meat so that the tip is in the centre
of the meat.
3.
Insert the plug of the Meatprobe as far
as it will go into the socket on the side
wall of the oven.
The window "Meatprobe" is displayed.
4.
Within 5 seconds using
desired core temperature.
5.
Confirm set core temperature with
6.
Select oven function.
The menu for the oven function is displayed.
7.
If necessary, set oven temperature.
3
A provisional end time will be calculated
depending on the quantity of food and
the selected oven temperature (at least
120°C) and operating mode. This pro-
cedure can amount to approx. 30 min-
utes and is updated in the display during
the cooking process. The system re-
quires that the Meatprobe is pushed into
the meat and into the socket at the be-
ginning of the cooking process and that
it is not removed during the cooking
process.
As soon as the pre-set core temperature is
reached, a signal sounds.
.
or
set the
.
Advertisement
Table of Contents
