Table of Contents
Advertisement
Setting
Set language
Buzzer Volume
Key Tones
Alarm/Error Tones
Service
Factory Settings
3
Between 22:00 and 6:00 the display re-
duces its brightness when the appliance
is switched off to save energy.
Operation of the Basic Settings
Example
1. Using
or
Basic Settings.
2. Confirm with
3. Using
or
want to adjust.
4. Confirm with
The value currently set appears in the
display.
5. Using
or
select the desired value.
6. Confirm with
The setting is changed.
Everyday use of Basic Settings
Set+Go
The function Set+Go means you can set all
settings for an oven function and then start it
later.
Example application:
You prepare a dish in the morning and enter
all necessary settings in the oven.
Your child comes home at lunchtime, puts
the dish in the oven, presses any key and the
oven starts with your settings.
Condition:
•
Fixed switch-Duration
Display
–
Deutsch
–
....
1 ..... 10
–
On
–
Off
–
On
–
Off
ECAIA207
V03IA003
24
select the menu option
.
go to the setting that you
.
.
Description
Select and set language in the display.
Set volume of key beeps and signals in steps.
Key beeps confirm each time a key is pressed with a beep.
Switch key beeps on or off.
Warning beeps sound when steps which cannot be car-
ried out are selected. Switch warning beeps on or off.
Indicates the version of the software, the configuration and
the period of operation.
Reset all settings to the factory settings (My Programmes
too).
To switch on Set+Go
1.
Select oven function with desired set-
tings.
2.
Press
key repeatedly until the
"Set+Go" window appears.
3.
Confirm with
The function Set+Go is now switched
on.
To start Set+Go
1.
Press any key (except
Selected oven function starts.
As soon as the oven function is com-
pleted, a signal sounds.
2.
Press any key to switch off the signal.
3
While the selected oven function with is
operating Set+Go, the Key Lock is ac-
tive (see section Key Lock).
3
Set+Go can be activated or deactivated
in the Basic Settings menu.
Heat+Hold
The function Heat+Hold keeps your pre-
pared dish warm for 30 minutes, after the
baking or roasting has ended.
This is helpful, for example, when your
guests are late.
electrolux 19
.
).
Advertisement
Table of Contents
