Paradyne 3170 Quick Reference page 9

Table 3. Network Interface Configuration Options
Option
NET Frame: NET Frame:
Mgmt Link: Mgmt Link:
Circuit Ident: Circuit Ident:
Table 4. DTE Channel Configuration Options
Option Factory
TS16
DTE Channels: DTE Channels:
Assign
Data
TS16: TS16:
Rsvd
Line 1 Displays: Line 2 Displays:
D1, D2 ... D24
N1 N2 N3 N1 N2 N3 ...... N24: N24
Factory Comments/Description
CRC4
Selects framing format Selects framing format.
noCRC
Disab
Specifies whether the FDL's Management Link is enabled Specifies whether the FDL's Management Link is enabled.
SNMP
Edit
Specifies the transmission vendor's circuit identifier. Specifies the transmission vendor's circuit identifier
Clear
Meaning
— Unassigned
Channel assigned
to this DTE channel
Prt1
Prt2
Channel assigned
Prt3 to port 1, 2, 3, or 4
Prt4
7
Comments/Description
Selects TS16 for signaling or
assigns DS0 channels on the DTE assigns DS0 channels on the DTE
Drop/Insert interface to DS0
channels on the network interface.
Specifies whether time slot 16 is
reserved for signaling information reserved for signaling information
or available for data.
Comments/Description
Function key under the channel
( (N1, N2, etc.) selects the DTE )
channel to assign (D1 through h l t i (D1 th h
D24, or –).