Table 10. SNMP Trap Configuration Options
Option
Num Trap Mgrs:
Trap n IP Adr:
Trap n IP Adr:
Trap n Dst:
Gen Trap:
Gen Trap:
Entp Trap:
Entp Trap:
Link Trap:
Link Trap:
Tra I/F:
Trap I/F:
Factory 1
Comments/Description
1
The number of trap managers supported by the device.
2–6
Edit
Specifies the IP address for each trap manager. This
S ecifies the IP address for each tra manager. This
configuration option is repeated for all n managers.
Clear
None
Com
Aux
Specifies the network destination for Trap Manager n .
FDL
EDL n
Disab
Warm
Specifies the general trap types to enable: WarmStart,
S ecifies the general tra ty es to enable: WarmStart,
Authentication Failure or both.
Auth
Both
Enab
S ecifies whether the
Specifies whether the
EnterpriseSpecific trap type is enabled.
Disab
Disab
Up
S ecifies the link tra ty e to enable: Tra on Link U , Link
Specifies the link trap type to enable: Trap on Link Up, Link
Down, or both.
Down
Both
NET
DTE
When any link trap types are enabled, specifies which links
E1s
to send traps for.
to send traps for.
Ports
All
13
g