Paradyne 3170 Quick Reference page 8

Table 2. Port Configuration Options (2 of 2)
Option
All Ones: All Ones:
Rcv RAI:
(Action on Received (A ti R i d
Remote Alarm Indication)
Tx Clock: Tx Clock:
InvertTxC: InvertTxC:
(Invert Tx Clock)
InvertData: InvertData:
EDL: EDL:
Err Rate: Err Rate:
(Excessive Error Rate)
Near-end: Near end:
Far-end: Far end:
Mgmt Link: Mgmt Link:
Factory Comments/Description
Disab
DTR
All ones sent to network (DTE) E1 when DTR or RTS All ones sent to network (DTE) E1 when DTR or RTS
interrupted.
RTS
Both
None
Data ort remains enabled, or is disabled, on receiving RAI Data port remains enabled, or is disabled, on receiving RAI
on the network interface.
Halt
Int
Selects whether the transmitted data clock is internal Selects whether the transmitted data clock is internal
(TXC) or external (XTXC).
Ext
Enab
S l Selects phase inversion of the transmit clock (TXC). t h
Disab
Enab
Allows the data on the port to be inverted Allows the data on the port to be inverted.
Disab
Enab
Specifies whether the Embedded Data Link is enabled Specifies whether the Embedded Data Link is enabled.
Disab
10E–4
10E–5
10E–6 Selects the error rate threshold for Excessive Error Rate
Al Alarm.
10E–7
10E–8
10E–9
Disab
Maint
S ecifies whether the device will maintain near-end Specifies whether the device will maintain near-end
performance statistics.
Send
Both
Disab
S ecifies whether the device will maintain far-end Specifies whether the device will maintain far-end
performance statistics.
Maint
Enab
Specifies whether the EDL Management Link is enabled. Specifies whether the EDL Management Link is enabled
Disab
6
i i f th t it l k (TXC)