Paradyne 3170 Quick Reference page 11

Table 5. Data Port Channel Configuration Options (2 of 2)
Option
Start At:
Line 1 Displays:
N1 N2 N3... N31:
(If assigned to NET)
D1 D2 D3... D31:
(If assigned to DTE) (If assigned to DTE)
NOTE: Configuration options in this table are made available after Prt n (where n is 1 or 2 for the Model 3172
and 1, 2, 3, or 4 for the Model 3174) is selected from the Channel Config screen.
Table 6. General Configuration Options
Option
Pri Clk Src:
Sec Clk Src:
Clock Rate: Clock Rate:
Factory Comments/Description
Clear Clears (unassigns) channels for this port.
N1 (D1)
N2 (D2)
N3 (D3)
This configuration option appears if the "Assigned By"
configuration option is Block or ACAMI.
N31 (D31)
Line 2
Comments/Description
Displays:
—
This configuration option appears if the "Assigned By"
Prt1, Prt2,
configuration option is individual channels (Chan).
Prt3, Prt4
Function key under the channel (N1, N2 etc.) assigns
D1, D2... D31
(unassigns) port (1, 2, 3, or 4) to that channel. (unassigns) port (1 2 3 or 4) to that channel
N1, N2... N31
Factory Comments/Description
NET
DTE
Prt n
Selects the primary clock source for the DSU/CSU.
Int
Ext
NET
DTE
Selects the secondary clock source for the DSU/CSU,
Prt n
used in the event of failure of the primary source. used in the event of failure of the primary source.
Int
Ext
2048
Selects the clock rate of the source if external Selects the clock rate of the source if external.
8
9
y