Warning Function; Warning Beeping Sound; Instruction Message Display - Necchi C360 Instruction Manual

Warning Function

v Warning beeping sound
- Operate correctly: 1 beep.
- Operate incorrectly: 2-short beeps.
- When the sewing machine is in trouble
and can't sew: 3-short beeps.
It means that the thread may be twisted or
jammed and the handwheel axle can't move.
Please look through the "Trouble shooting
guide" to find the solution. After the problem
has been solved, the machine will be able to
sew.
Return bobbin winder spindle to left
When the bobbin thread is full or machine
stop, if the bobbin winder spindle is still in the
right position, you will hear 3-short beeps by
pressing any button until you push the spindle
to the left.
Return the bobbin winder spindle to the left.
If the problem is still not solved, please
contact your local dealer.
During sewing, if the thread has been
jammed inside the hook and needle
movement stops. If you continue to sew,
the machine will stop automatically due to
safety. If machine stops, please turn off the
machine firstly then turn on again.
v Instruction message display
The sewing machine is in trouble
The animation message means that the
thread is twisted or jammed and the hand
wheel axle cannot move. Please look through
the "Trouble shooting guide" to find the
solution. When the problem is solved the
machine will continue sewing.
82
Note
n Attention