Necchi C360 Instruction Manual page 37

1
X1
X2
X3
X4
X5
1 2
Elongation button
When the satin stitch is selected, Regular
Pattern Group 026-045 can be elongated
up to 5 times its normal size by pressing the
elongation button.
The LCD screen will display the elongation
icon and the machine will continue to sew the
elongation stitch until the elongation button is
pressed again.
When the width or length or stitch is changed,
a greater variety of stitches are available.
①
Normal stitch size
Buttonhole adjustment button
When the buttonhole stitch is selected, Direct
Pattern Group number 0 or Regular Pattern
Group number 009-020, the LCD screen will
display the buttonhole width size.
Continuously press the elongation button to
adjust buttonhole size, from M → L → S.
- Use the seam ripper to cut the center of
the buttonhole being careful not to cut
any stitches on either side.
- Restart the buttonhole width will
automatically default to M size setting.
- Refer to electronic buttonhole foot
sewing chapter and set up the buttonhole
sewing size precisely. (Please refer to
"Buttonhole stitch" chapter for more
information.)
①
S: Small
3
②
M: Medium
③
L: Large
29
Note