Table of Contents
Advertisement
3.4.8.1
Device Detecting Configuration
Options Summary
Action
Select action that robot should do.
Soft or hard reset
Select reset type robot should send on each boot.
Retry-Count
Fill retry counter here. Robot will reset system at most counter times, and then let
system continue its POST.
At time
Select robot action time:
After show logo - Robot will do action after logo is displayed. System devices are
almost ready.
Before show logo - Robot will do action earlier before logo, but some devices may not
be ready.
Chapter 3 – AMI BIOS Setup
Reset System
Hold System
Soft
Hard
30
After show logo
Before show logo
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
Optimal Default, Failsafe Default
54
Advertisement
Table of Contents
