Table of Contents
Advertisement
E
D
F
Turntable Installation
Hub (underside)
Glass tray
Turntable
shaft
Turntable ring assembly
NOTES:
• The waveguide cover is fragile. Care should be taken when cleaning inside the oven to ensure that it is not damaged.
• After cooking fatty foods without a cover, always clean the cavity and especially the grill heating element thoroughly, these must be dry
and free from grease. Built-up grease may overheat and begin to smoke or cat
• Always operate the oven with the turntable and turntable support
turntable may rattle, may not rotate properly and could cause damage to the oven.
• All food and containers of food are always placed on the turntable for cooking.
• The turntable rotates clockwise or anti-clockwise. The rotary direction may change each time you start the oven. This does not a ect
cooking performance.
WARNING:
The door, outer cabinet, oven cavity, accessories and dishes will become very hot during operation. To prevent burns,
always use thick oven gloves.
A
B
C
O
V
E
Names of Oven Parts and Accessories
Remove the oven and all materials from the carton and oven cavity.
A) Control panel
B) Turntable ring assembly
C) Glass tray
D) Observation window
E) Door assembly
F) Safety interlock system
(1)
Higher Wire Rack(Cannot be used
in microwave function)
a. Never place the glass tray upside down. The glass tray
should never be restricted.
b. Both glass tray and turntable ring assembly must always
be used during cooking.
c. All food and containers of food are always placed on the
glass tray for cooking.
d. If glass tray or turntable ring assembly cracks or breaks,
contact your nearest authorized service center.
Never touch the grill when it is hot.
NOTE: When you order accessories, please mention two items: part
name and model name to your dealer or SHARP authorised service
agent.
e.
ed correctly. This promotes thorough, even cooking. A badly
GB-3
N
A
N
D
A
C
C
E
S S
O
I R
S E
(2)
Lower Wire Rack(Cannot be
used in microwave function)
ed
Advertisement
Table of Contents
