Panasonic GP-X Series User Manual page 59

・Height detection mode: "
Ramco Innovations www.ramcoi.com
The reverse value change direction is selected.
The sample hold and external trigger modes are automatically selected.
Select "Default" for the application mode to restore the factory shipment
settings of the application mode. Note that the negative span (inclination)
setting of scaling changes to the positive span (inclination) after restoration
of default settings. (Only the sign reverses; the scale itself does not
change.)
Check the trigger level and trigger hysteresis because calculation errors
may be caused.
Before changing the application mode, select "default".
" (height)
Phone 800-280-6933 nsales@ramcoi.com
Displayed
value
Time
53