Electrolux ETB3440M-H User Manual page 24

24 www.electrolux.com
Automatic Ice maker system
CONCERN
Ice maker does not roduce
ice or not enough ice
The icemaker is designed
to produce a tray of ice
approximately every 2
hours, depending on the
conditions.
Ice has bad odour or taste
If you still require service
If you have a problem, and the problem persists after you have made the checks mentioned,
contact your nearest Electrolux approved Service Centre or the dealer you bought the refrigerator
from. Be ready to quote the model number, the 9-digit PNC and 8-digit serial number, which is
stated on the label inside the refrigerator compartment.
WHAT TO DO
• Ensure that the Ice Maker is switched on at the user interface
refer to "About the User Interface" for details.
• Ensure water tank is full and contains clean water (if liquids
other than clean water have been used, call Electrolux
Customer Care).
• Ensure water tank is securely pushed into pump housing.
• If the freezer compartment is too warm, refer to "freezer is
too warm" then wait 24 hours for the freezer to reach ideal
temperature.
• Turn the unit off at the mains and leave for 2 minutes then turn
the appliance back on (this will reset the icemaker unit). Check
for ice production after 24 hours.
• Check that there is no obstruction under the ice maker and
ensure the ice bin is fitted correctly.
• Cover food to ensure ice does not absorb foreign odours.
• Interior of appliance or ice bin may require cleaning, refer to
"Cleaning your refrigerator".
• Discard stale ice monthly and allow ice maker to produce a
fresh supply.