Electrolux ETB3440M-H User Manual page 17

Water Tank
CAUTION
BEFORE REMOVE; to empty the water in
the tank.
To remove the water tank and disassembly
cleanable parts follow thesemsteps:
3
1. Press 2 clips on side of water tank tomunlock
4 water tank from lugs and hold onnthe tank.
2. Pull out the water tank.
5
O-ring
3. Rotate tank cover lid up and off from the
over.
4. Unclip the both side clips and lift off from
water tank.
5. Screw the water valve off from tank.
3
4
3
nozzle rubber
4
3
4
5
5
5
6. Remove nozzle rubber and o-ring from water
valve.
O-ring
O-ring
O-ring
nozzle rubber
nozzle rubber
nozzle rubber
Reverse the step to assembly the water tank
and return to its place.
NOTE: Screw in the water valve to water tank
till stopper touch the rip and the water valve
nozzle must be point down as picture.
4
4
4
4
Rip
Stopper
water valve
nozzle
WARNING
Your appliance is fitted with long life LED
lighting. In the unlikely event the LED
lights should fail, then the LED lights
should be serviced by the service agent,
to avoid a safety hazard.
Rip
Stopper
Refer to the warranty page for contact
Rip
details.
Rip
Stopper
Stopper
water valve
nozzle
water valve
water valve
nozzle
nozzle
EN 17