Advertisement
3.6
Removing the start number plate
3.7
Installing the start number plate
3.8
Removing the seat
Caution
Danger of burns The voltage regulator gets very hot when the vehicle is operated.
–
Allow the voltage regulator to cool down before performing any work.
(SX‑F FACTORY EDITION)
–
Join plug-in connector
Unit).
W00589-10
Finishing work
–
Install the start number plate. (
–
Remove screw
–
Unhook the start number plate from the brake line and remove
it.
S05336-10
–
Position the brake line in holders
plate.
–
Position the start number plate. Mount and tighten screw
The holding lugs engage in the fender.
S05337-10
A
(antenna of the Connectivity
p. 15)
1
.
A
on the start number
WORK 3
1
.
15
Advertisement
