Advertisement
2 SETUP
8
–
Mount the washer and splint
–
Repeat these steps on the opposite side.
–
Install the frame protector. (
(XC‑F US, SX‑F FACTORY EDITION)
–
Install the engine guard. (
I00081-10
–
Remove the seat. (
–
Connect positive cable
Guideline
Screw, battery termi-
nal
–
Connect negative cable
Guideline
Screw, battery termi-
nal
Contact disks
cable sockets
nal.
–
Slide positive terminal cover
–
Charge the 12-V battery. (
Guideline
The 12-V battery must be fully charged before it is handed
over to the customer.
W00276-10
Info
The first charging process may take longer with a new
12-V battery.
–
Unpack and mount the KTM PowerParts included in the deliv-
ery (optional).
Info
Read the accompanying KTM PowerParts fitting instruc-
tions.
–
Stick displacement sticker on the left and right of the side
cover.
–
Attach the stickers included in the scope of supply (optional).
–
Refuel. (
p. 21)
–
Position all controls in their exact positions on the handlebar.
Tighten all screws.
–
Remove the remaining film, padding, the corrugated card-
board, and the other packaging material.
–
Prepare the vehicle according to the specifications in
I00085-10
KTM Dealer.net for handover to the customer.
3
.
p. 17)
p. 17)
p. 15)
4
to the 12-V battery.
M5
2.5 Nm
(1.84 lbf ft)
5
to the 12 V battery.
M5
2.5 Nm
(1.84 lbf ft)
C
must be mounted under screws
7
with the claws toward the battery termi-
8
over the positive terminal.
p. 17)
6
and
Advertisement
