Philips SP9880 Manual page 37

Problem
I replaced the
shaving heads,
but the display
still shows the
replacement
reminder.
A shaving unit
symbol has
suddenly
appeared on the
display.
The notification
symbol flashes
and the shaver
beeps while the
shaver is charging.
The notification
symbol flashes
and the shaver
beeps when I try
to shave.
The notification
symbol flashes
and the shaver
beeps after
cleaning the
shaving heads.
Water is leaking
from the bottom
of the appliance.
Possible cause
You have not reset
the appliance.
This symbol reminds
you to replace the
shaving heads.
The appliance is
overheated.
The shaving heads
are soiled.
The shaving heads
are damaged.
During cleaning,
water may collect
between the inner
body and the outer
shell of the
appliance.
English
Solution
Reset the appliance by
pressing the on/off
button for approx. 7
seconds.
Replace the shaving
heads (see
'Replacement').
When this happens, the
shaver stops charging
automatically. Charging
continues once the
temperature of the
shaver has decreased to
the normal level after
approx. 10 minutes.
Clean the shaving heads
(see 'Cleaning and
maintenance').
Replace the shaving
heads (see
'Replacement').
This is normal and not
dangerous because all
electronics are enclosed
in a sealed power unit
inside the appliance.
37