Table of Contents
Advertisement
FUNCTION
Standby
Settings
Operation
DESCRIPTION
Network
Enable Network Standby Mode
To enable or disable the network standby mode after the
projector is automatically or manually turned off.
• On: The projector will maintain at network standby
mode with less than 6W power consumption.
• Off: The projector will maintain at normal standby
mode with less than 0.5W power consumption.
Auto Disable Network standby mode
To enable or disable the auto switch from network
standby mode to non-network standby mode after a
period of time. (This setting should be grayed out when
Enable network standby mode is off.)
• Never:To disable the auto switch function. The
projector will maintain at network standby mode with
less than 6W power consumption.
• 20 min / 1 hr / 3 hr / 6 hr: The projector will be
switched to non-network standby mode after 20
minutes / 1 hour / 3 hours / 6 hours
Monitor Out
Selecting On enables the function. The projector can
output a VGA signal when it is in standby mode and the
COMPUTER 1 jack is correctly connected to devices. See
"Connection" on page 25
Audio Pass Through
The projector can play sound when it is in standby mode
and the corresponding jacks are correctly connected to
devices. Press
/
to use. See
"Connection" on page 25
connection.
Enabling this function slightly increases the standby
power consumption.
for how to make the connection.
to choose the source that you wish
for how to make the
63
Advertisement
Table of Contents
