Table of Contents
Advertisement
About the aspect ratio
In the pictures below, the black portions are inactive areas and the white
portions are active areas. OSD menus can be displayed on those unused
black areas.
1.
Auto: Scales an image
proportionally to fit the
projector's native resolution in
its horizontal width. This is
suitable for the incoming image
which is neither in 4:3 nor 16:9
and you want to make most use
of the screen without altering
the image's aspect ratio.
15:9 picture
2.
Real: The image is projected as
its original resolution, and
resized to fit within the display
area. For input signals with
lower resolutions, the projected
image will display smaller than if
resized to full screen. You could
move the projector away from
the screen to increase the image
size if necessary. You may also
need to refocus the projector
after making these adjustments.
4:3 picture
16:9 picture
38
Operation
3.
4:3: Scales an image so that it is
displayed in the center of the
screen with a 4:3 aspect ratio.
This is most suitable for 4:3
images like computer monitors,
standard definition TV and 4:3
images aspect DVD movies, as it
displays them without aspect
alteration.
4:3 picture
4.
16:9: Scales an image so that it
is displayed in the center of the
screen with a 16:9 aspect ratio.
This is most suitable for images
which are already in a 16:9
aspect, like high definition TV, as
it displays them without aspect
alteration.
16:9 picture
5.
16:10: Scales an image so that it
is displayed in the center of the
screen with a 16:10 aspect ratio.
This is most suitable for images
which are already in a 16:10
aspect, as it displays them
without aspect alteration.
16:10 picture
Advertisement
Table of Contents
