Table of Contents
Advertisement
Observe the information about op-
erating logic → Page 19.
Note: The programme settings are
not saved permanently for the pro-
gramme.
13.4 Saving the programme
settings
You can save your individual pro-
gramme settings as favourites.
Requirements
A programme is set.
¡
→ "Setting a programme", Page 32
The programme settings have
¡
been adjusted.
→ "Adjusting the programme set-
tings", Page 32
Press and hold Favourite for ap-
▶
prox. 3 seconds.
Press Favourite to call up the
saved programme.
Note: To overwrite the saved pro-
gramme, repeat the steps above.
13.5 Loading laundry
Note: To prevent creasing, note the
maximum load for the programmes.
→ "Programmes", Page 27
Requirements
The laundry is prepared and sor-
¡
ted.
→ "Laundry", Page 31
The drum is empty.
¡
Open the door.
1.
Place the laundry in the drum.
2.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
13.6 Inserting the measuring
aid
Pull out the detergent drawer.
1.
Press down on the insert and re-
2.
move the detergent drawer.
Insert the measuring aid.
3.
13.7 Using the measuring aid
To more easily measure the liquid
detergent, you can use a measuring
aid in the detergent drawer.
Note: Do not use a measuring aid for
viscous detergents, for washing
powder, or when the prewash or pro-
gramme end time is activated.
Requirements
The detergent drawer → Page 18
¡
has been pulled out.
The measuring aid is inserted.
¡
→ Page 33
Basic operation en
33
Advertisement
Table of Contents
